Find friends on yorfriends social networking community

Promote your business on yorfriends marketing community

Advertise Your website, Get more customers

Advertise on yorfriends.com for FREE

Yorfriends--marketing and advertising platform

Promote your business

Yorfriends_Internet Marketing and Advertising Site
Get more website traffic and sales at https://yorfriends.com
Link Popularity Tool - AddMe

flatprinterlicheng's blog

advertisement

Knowing the operation process of the Hot Air Stenter Machine in time is very necessary for the majority of employees who produce fabrics, because only in this way can it avoid the influence of the production error caused by the operation error. Since this is the case, the following is the same as Licheng Machinery Do a simple understanding of the specific operation process of this equipment.>>

First of all, when the fabric has completed the relevant processing work, it will be introduced to the operating table. The purpose of this is to facilitate the sending of the relevant fabric into the shaping equipment for shaping processing. The correct operation method is used to send the fabric to the machine.>>

Then, click the relevant hot air tenter button to enter the heating system. After entering the system, you need to adjust the heating temperature and heating time and other data, and also need to do moisture removal, so as to make the box Get the maintenance effect it deserves, and only then can it have a longer service life.>>

Finally, heat the related fabrics, which can help to set the shape. After completing the related operations, turn off the switch and store the data to cut off the power. After doing these tasks, you need to do the hot air tenter. Cleaning and maintenance work.>>

The above is the operation process of the hot air tenter. When using this type of sizing equipment, you must master the specific operation method and the problems that need to be paid attention to in each step, otherwise it may be caused by improper operation The setting effect of the setting machine is affected. If you really do not know what these precautions are, you can also ask the Lichengda printing and dyeing staff at the time of purchase.>>

The main components of the Hot Air Stenter machine are divided into the feeding part, the weft feeder, the chain, the oven body and the falling cloth device. Hot Air Stenter machine is fed into the machine by the stripping device. The machine automatically attaches the two ends of the cloth to the needle plate. The two ends of the needle plate enter the oven with the mechanical running cloth. The oven is heated by electric, and the fan blows through the continuous. A few constant temperature ovens of different temperature sections, after the end of the cloth is cooled and destaticized, the swing falls into the cloth, and the crisp, beautiful cloth is obtained.

What is a hot air stenter machine? It’s inlet shelf and width limiter can help the cloth guide to unfold and correct the cloth, and can choose the high and low pull-in cloth; the spreader and the cloth edge tracker are responsible for the unfolding and edge tracking function of the front edge of the upper needle. The needle clamp chain and the track are transported by the needle plate or the splint into the oven; the air exhaust system of the machine has a row of windmills, a duct and an inlet, an exhaust damper, and an exhaust air optimization design; hot air circulation Windboxes, hot air circulation windmills, heat exchangers, drying or styling fabrics, etc.


The hot air stenter machine is mainly used for padding, dyeing, softening, anti-slip, tentering and resin finishing to improve the fabric feel, slip, color, width, strength and appearance of non-pure cotton. Variety can also play a role in stabilizing the size. The chemical material is infiltrated into the cloth trough, and is uniformly pressed by the roller to enter the oven. When the cloth passes through the oven, the machine is dried under the action of high temperature hot air, and the cloth after the has a good hand feeling and a stable size. It is mainly used for heat of warp knitting, weft knitting and chemical fiber fabrics. It can also be used for various fabrics such as coating, wool, cotton and polyester. If you intersted in LiCheng Hot Air Stenter or Flat Screen Printing Machine , please check below link: https://www.hotairstenter.com/product/hot-air-stenter.html

Share:

Archives

advertisement
https://c2611at8l137wre1zbrry8ndcd.hop.clickbank.net/

Advertisement

advertisement